Rotate Any Vehicle 360° Without Needing Extra Space

Nostec offers complete car turntable solutions for villa driveways, showrooms, and commercial parking. Pit installation or floor mounted vehicle turntables ship fully assembled, with site dimensions confirmed on a free 3D drawing before production begins.

Free 3D Drawing

0 Hours

Waterproof Option

IP 0

7–10Days

Lead Time

Full Warranty

0 Year

Still Struggling With Vehicle Access or Display Space?

The Driveway Is Too Narrow to Turn Around

Every exit becomes a reversing exercise. In a tight villa driveway or underground garage, one misjudgment means a scratch or a collision.

A Static Display Does Not Show the Full Car

Showroom floor space is expensive. A car sitting still only shows one angle. A rotating platform lets every visitor see the full vehicle without walking around it.

A Fixed Installation Cannot Be Moved Later

Some projects need a turntable for a temporary event or a showroom that may relocate. A welded installation cannot be removed without damage.

A Manufacturer That Stays With You From Drawing to Delivery

With over 25 years of manufacturing experience, we confirm every dimension, test every unit, and stay available at every step from the first drawing to the day it is installed, so that when it arrives, you have nothing to explain.

Countries Exported

0 +

Every market covered and every standard met.

CE & ISO Certified

Pass local inspections and secure client payments on schedule.

Modern Factory

0 m²

A stable production base built to support long-term orders.

Units Annual Capacity

Top-tier manufacturing speed to ensure your projects stay on schedule.

Trusted by Industry Leaders Worldwide

Certifications

Find the Right Model for Your Project

Not every project needs the same turntable. We offer two installation types, six surface options, and a full range of diameters to fit any site and any use case.

	Pit Installation	Floor Mounted
Best For	Villa driveways, underground garages, permanent installations	Showrooms, event venues, relocatable setups
Diameter	3m / 3.5m / 4m / 4.5m / 5m / 6m	3m / 3.5m / 4m / 4.5m / 5m / 5.5m
Recommended	4m, 4.5m and 5m for most cars	4m and 4.5m for most cars
Self Height	250mm	120mm
Capacity	2,000 / 3,000 / 4,000 / 5,000 kg	2,000 / 3,000 / 4,000 kg
Pit / Ramp	250mm pit depth	400mm ramp length
Relocatable	No	Yes
Speed	0.2 to 2 rpm	0.2 to 2 rpm
Top Surface	Checkered plate standard. Optional: Galvanized / Brick / Aluminum / SS304 / Tempered glass	Checkered plate standard. Optional: Steel plate / SS304 / Aluminum
Motor	400W × 4	180W × 4 or 6
Control	Control box / Remote control	Control box / Remote control
Rotate Mode	Clockwise / Counter-clockwise / Stop	Clockwise / Counter-clockwise / Stop
Power Source	AC 110V / 220V / 380V / 415V	AC 110V / 220V / 380V / 415V

Every Turntable Leaves Our Factory Ready to Install and Operate

The structure connects by bolts. Three workers complete installation in one day and the turntable can be relocated without any structural damage.

Speed adjusts from 0.2 to 2 rpm without steps. The platform starts and stops gradually with no sudden jolt.

Sits at 120mm above ground with a 400mm entry ramp. Most standard cars and SUVs drive on without any clearance concern.

More corrosion resistant than ordinary spray paint and far less likely to peel over time. Galvanized treatment available for outdoor use.

Rated for outdoor parking areas, coastal environments, and high-humidity sites. Operates even when fully submerged.

Every unit goes through a full rotation test before packaging. Smooth operation and full control function confirmed before dispatch.

Four Steps From Your First Inquiry to a Turntable Ready to Install

Share Your Site Details

Send us a site photo or a rough sketch. Tell us the vehicle type, the installation type you prefer, and how the turntable will be used.

3 Hours Free 3D Drawing

We send a full 3D rendering and an itemized quote within 3 hours. You review the drawing with your client and confirm all dimensions before we begin production.

Confirm and We Build

Standard models ship in 7 to 10 days. Custom configurations ship in 10 to 20 days. Every unit is fully assembled and tested before it leaves our factory.

Install in One Day

Three workers can complete installation within one day following the included manual. On-site support is available in the Middle East. Engineers can travel to other markets on request.

Where Our Car Turntables Are Used

From villa driveways to commercial showrooms, every installation is designed around the exact site conditions.

What Your Client Experiences After the Turntable Is in Place

Go from managing supplier problems to growing your distributor business with a manufacturer who delivers what they promise.

Everything You Need to Know Before Ordering

1.How quiet is the turntable during operation?

The motor uses a friction drive system that runs at 45 dB or below. It is quiet enough for indoor showrooms, villa garages, and any environment where noise is a concern.

2. What is the minimum diameter for a standard car?

4m is the minimum recommended diameter for most standard passenger cars. 4.5m and 5m are recommended for larger vehicles or SUVs.

3. Can the turntable be used outdoors?

Yes. We supply an IP68 rated waterproof motor for all outdoor installations. Galvanized surface treatment is also available for additional corrosion protection.

4. Can the surface match the surrounding floor?

Yes. Options include checkered steel, galvanized plate, aluminum, SS304 stainless steel, tempered glass, and brick or wood finish.

5. What does the warranty cover?

The full unit is covered for 24 months and the structural frame for 5 years. Lifetime technical support is available and we respond to every inquiry within 12 hours.

Ready to Win Your Next Big Project?

Send us your shaft dimensions or project requirements. Our engineers will reply with a 3D drawing and exact quote within 3 hours.